ISICAM C
It is an insulating glass unit formed by combining two or more glass plates in factory conditions to contain dry air or gases suitable for ambient pressure..
ISICAM S
Isicam S Series is produced with Low-E Glasses with high quality heat control coating. It reduces your fuel costs by providing maximum thermal insulation. Compared to ordinary double glazing, it reduces heat losses by 50% and reduces fuel costs. While it allows you to benefit from the sun’s heat at the maximum level, it does not compromise on light transmittance. It prevents window fronts from being cold in winter and delays fogging compared to ordinary double glazing.
ISICAM K
Isicam K Series is produced with Solar Low-E Glasses with high quality heat and solar control coating. By providing maximum thermal insulation and solar control, it reduces your fuel costs in winter and air conditioning costs in summer.
Compared to ordinary double glazing, it reduces heat losses by 50%, reducing fuel costs in winter, and reducing the penetration of solar heat by 40%, reducing air conditioning costs in summer and providing energy savings.
While providing heat and solar control, it does not compromise transparency and natural daylight.
It prevents window fronts from being cold in winter and hot in summer, and delays fogging compared to ordinary double glazing.
Compared to ordinary double glazing, it reduces heat losses by 50%, reducing fuel costs in winter, and reducing the penetration of solar heat by 40%, reducing air conditioning costs in summer and providing energy savings.
While providing heat and solar control, it does not compromise transparency and natural daylight.
It prevents window fronts from being cold in winter and hot in summer, and delays fogging compared to ordinary double glazing.
Tempered Glass
Tempered glass is a type of safety glass. Original glass is thermally treated to increase its strength, creating a stronger and safer glass form often needed for most applications. The tempering process is the sudden cooling of the glasses with air by bringing them to temperatures between 600°C and 650°C with heating systems specific to this process.
As a result of the tempering process, compression stress (compression) is applied to the outer surfaces of the glass, and an indirect tensile stress (tension) is gained in the middle of the glass. Thus, the glass becomes resistant to shrinkage and impacts.
Semi-tempered is produced in the same furnace as full-tempered glass. It has less surface tension because it is cooled less. Its strength is half that of tempered glass. The Heat Soak test is not applied because the risk of spontaneous breakage is low. When broken, it breaks into larger pieces than full tempered glass.
Curved temper is the process of bending the glass, which is heated heavily until it reaches the melting point, according to the desired radius with a certain air pressure in the cooling furnace. It can also be used as curved laminated or double glazing.
Laminated Glass
Laminated glass is produced by joining two or more glass plates under heat and pressure with the help of colored or colorless special binder polyvinyl butyral (PVB) layers. It keeps the parts in place in case of breakage, reducing the risk of injury. Because of this feature, laminated glass is considered as safety glass.
It is a product that provides both aesthetic and security values in the foreground in museums, jewelers, banks, shops, residences, showcase areas, police stations and areas where high-level security measures are required.
Bullet Resistant Glass
Lead Resistant Glass is a laminated combination with polyvinyl butyral (PVB) or polycarbonate interlayer in areas where life and property safety is required. The determination of the total resistance of the counter attack glasses is formed by evaluating the glass and the carrier joinery together. As a general principle, it is a defense unit created with the possibility that the bullet does not penetrate, does not find the target even if it does, and does not harm the target even if it finds the target. The combinations to be created according to the area to be used and the defense class and the units produced with international certificates are classified with BR codes for Glass and FB codes for Joinery.
Flotal Glass
Mirror, which is an indispensable decorative element of all interior spaces from furniture to bathrooms, from homes to shops, from studios to gyms, combines perfection, durability and quality with elegance and brightness.
Glass Door
Glass doors that produce aesthetic and ergonomic solutions in indoor and outdoor applications create spacious spaces with floor hydraulic mechanism, hinged ceiling and wall sliding mechanism and alternative accessory details.
It creates a modern line with tempered and tempered laminated glasses and accessories and mechanisms with international standards without sacrificing safety.
Glass, Stainless, Aluminum Railing Systems
Glass Stairs
Glass Floor
Paradust and Shower Cabin
Shower Cabin and Paradus Systems, which are created by combining special aluminum profiles and accessories with tempered glasses, create aesthetic and quality solutions in Residence, Hotel and Social areas.
Floor mounted , Bathtub mounted , Sliding , hinged etc. It provides suitable application opportunity in every architecture with many alternative applications.
Aluminum Joinery
Aluminum joinery systems; With features such as high water and air impermeability performance values, heat insulation performance, sound insulation and durability, it produces long-lasting solutions in all interior and exterior spaces in housing, office, store, school, architecture.
It offers alternative solutions in areas where it will be applied with different thermal bridges, with or without thermal insulation. It has a wide variety of accessories, can be painted in any color in the Rall chart, alternative texture and wood coating possibilities.
Aluminum Sliding Joinery
Aluminum sliding joinery systems; In addition to all the benefits of aluminum joinery, creating more spacious areas, saving space inside the unit, max. It is an aesthetic and innovative application at the point of creating an open space. In addition to the horizontal working principle of the system, the efficiency can be increased with hebeschiebe accessories.
It has a wide variety of accessories, can be painted in any color in the Rall chart, alternative texture and wood coating possibilities.
Covered Facade
Covered facade systems are an exterior coating system that combines Glass, Aluminum and Steel. This system, which is preferred with its visuality and aesthetics, provides the user with a financial advantage in terms of being economical.
It has high performance in terms of heat and sound insulation. The covers applied on the glass in the horizontal and vertical directions can also be used as a sunshade and dropper. Opening hidden sash windows can be created on the system with special profiles and accessories.
Cassette Silicone Facade
Cassette Silicon façade systems are a glass façade system in which glass aesthetics is at the forefront, and the profile does not appear in the horizontal and vertical directions when viewed from the outside. It is formed by attaching the cassettes formed by bonding the glasses to special profiles with the Bonding system, to the facade. It has high performance in terms of heat and sound insulation. Opening hidden sash windows can be created on the system with special profiles and accessories.
Office Partition
Modular Office partitions, one of the most effective products of contemporary and innovative architecture in offices, create prestigious spaces in the applied area. Combining Glass, Aluminum, Wood and Metal, it creates spacious, aesthetic and safe spaces in the area where it is applied. It has functional applications with many versions such as wooden paneled, as well as glass options such as single-glazed, double-glazed, double-glazed blinds.
Skylight - Roof Light
Skylight Systems is a highly insulated roof covering application by using special aluminum condensate channel joint profiles on the carrier construction and glass and polycarbonate sheets as the main skylight material. Roof skylights can be applied in various forms and sizes. It allows to realize all kinds of architectural designs in the forms known as Vault, Dome, Single Slope, Cracked and Pramit systems.
Winter Garden
Winter Gardens is a system developed to create daylight free from all the negative effects of the sun and to create spacious living spaces in all climatic conditions. It creates aesthetic spaces in all kinds of architecture by using carrier aluminum profiles with condensate channels and high performance glasses.
Aluminum Composite Panel
Aluminum Adjustable Door Frame
Adjustable door frames; It is a system that perfectly complements the profiles and trim and finish details prepared for many wall thicknesses. It is an aesthetic product as well as advantages such as fast production, fast assembly, long life, wide accessory options. As a door leaf; Products such as glass, aluminum frame glass, wood can be used.
Automatic Shutter
Automatic shutter systems; It is an application that brings together security with automation and produces different solutions for the user in many places, from store windows to vehicle entrance areas.
- Extrusion (unfilled) aluminum shutter systems,
- Steel shutter systems with polyurethane filling,
- Steel Shutter systems
Automatic Blinds
Automatic blinds systems are divided into two as galvanized steel systems and aluminum systems. While galvanized steel systems are preferred in all places where safety is at the forefront, aluminum systems are preferred in places where aesthetic appearance is at the forefront.
It is a preferred system in residential projects and is compatible with all window systems. It can be connected to smart home automation systems. With advanced planning, the engine can be stored in a wall or ceiling cavity.
Sectional Door
Sectional Doors; It is a system used in Factory Entrances, High ceilings and large areas, especially as a garage door. It is manufactured and assembled with various bedding applications according to the shape of the area.
- It can be used up to 35 m2 surface area.
- Security, isolation and safety are at the highest level.
- By attaching a service door to the panel door, personnel entry and exit are provided.
Photocell Door
Photocell Doors; It is an application that is adjusted according to the architectural images of the spaces, with a special profile system, and produced with aesthetic and innovative solutions. The opening and closing system is optionally available with radar, sensor, hand sensor or remote control solution options.
- Sliding – Single and Double Wing Photocell Doors
- Telescopic Photocell Doors
- Hermetic Hospital Doors
